21
4
Open the terminal cover and connect the
camera to the AC adapter using the USB
cable provided with the camera.
Make sure that the cable is connected in
the correct orientation.
5
Insert the AC adapter into the power outlet.
When charging is in progress, the charge lamp will
light up yellow-green.
It takes about 240 minutes to recharge the battery.
The time required to recharge the battery depends on
the ambient temperature and the status of the
recharge level.
6
When the charge lamp goes out, charging is completed.
If the charge lamp flashes
The battery temperature is too high or too low. We recommend charging
in a location where the ambient temperature is between 10°C and 30°C.
Wipe the battery contacts with a clean, dry cloth.
CAUTION
The battery cannot be charged when the camera is turned on. Be sure to
turn off your camera before charging.
If the number of images that can be taken on a single charge is
significantly reduced, the battery is reaching the end of its lifespan.
Replace it with a new one.
To Next Page
Loading...
