Sigma R19 - Specifications; Technical Specifications

User Manual 9
Manufacturing technology
Architecture
General dimensions
Weight
Printing volume
Number of extruders
Nozzle diameter
Layer height
Positioning resolution
Operating temperature
Maximum extruder temperature
Maximum printing surface temperature
Filament diameter
Compatible material
Electronics
Connectivity
Firmware
Operating sound
Compatible files
Software preparation files
Power supply
Electrical energy consumption
Fused filament fabrication (FFF)
Independent dual extruder (IDEX)
465 mm x 440 mm x 680 mm (fully assembled)
15 kg (without filament spools)
210 x 297 x 210 mm
2
0.3 / 0.4 standard / 0.5 Special / 0.6 / 0.8 / 1mm
0.05-0.5 mm (depending on the nozzle diameter)
Axis X: 0.0125 mm
Axis Y: 0.0125 mm
Axis Z: 0.001 mm
15 ºC - 35 ºC
290 ºC
100 ºC
2.85 ± 0.05 mm
PLA / ABS / Nylon / PET-G / TPU / PVA / Composites / Others
BCN3D Electronics v1.0
SD card (autonomous operation), USB
BCN3D Sigma - Marlin
50 dBA
gcode
Recommended: BCN3D Cura
Compatible: Slic3r, Simplify3D,...
AC 84–240 V, AC 3.6-1.3A, 50–60 Hz
240W
Specifications