MDP 101-1
Page 68 05.06.2020
7 Appendix
7.1 Transport, storage and disposal
Transport:
• Use only the manufacturer’s original recyclable packaging
• Avoid shocks
• Maximum temperature range –25 to +70 °C (-13...158 °F), maximum
20 K/hr rate of change
• Maximum 95 % relative humidity, not condensing
• The servo drive contains electro statically sensitive components,
which can be damaged by incorrect handling. Discharge yourself
before touching the servo amplifier. Avoid contact with highly
insulating materials (artificial fabrics, plastic films etc.). Place the
servo drive on a conductive surface.
• If the packaging is damaged, check the unit for visible damage. In
this case, inform the shipper and the manufacturer. Do not install and
operate the unit in this case!
Packaging:
• Card box, can be recycled
• Labeling: nameplate outside at the box
Storage:
• Only in the manufacturer’s original recyclable packaging
• The servo amplifiers contain electro statically sensitive components,
which can be damaged by incorrect handling. Discharge yourself
before touching the servo amplifier. Avoid contact with highly
insulating materials (artificial fabrics, plastic films etc.). Place the
servo amplifier on a conductive surface.
• Maximum stacking height 10 card boxes.
• Storage temperature range –25 to +55 °C (-13...131 °F), maximum
20 K/hr rate of change
• Maximum relative humidity 95 %, not condensing.
To Next Page
Loading...
Need help?
General