MDP 101-1
05.06.2020 Page 35
3.3.8 Usage of cooling units
The servo drive system operates up to 45 °C (55 °C with power reduction) ambient
temperature. This means, that there could be a need to use a cooling unit.
Note: Principally, the usage of a cooling unit can and will produce
condensation water. So it is important to observe following:
• Mount cooling units in a way that condensation water does not leak
into electronic devices in the switchgear cabinet.
• Mount cooling units, by which amassed condensation water cannot
be sprayed into electronic devices by the fan of the cooling unit.
Cooling unit on top of the
switchgear cabinet
Cooling unit in the door of
the switchgear cabinet
To Next Page
Loading...
Need help?
General