6
INSTALLATION AND MAJOR COMPONENTS
ELECTRICAL
Each MCD machine is driven by a 3/4 HP
208/230/460V, 50/60 Hz, three phase motor.
Highest amp draw is 2.8 at 220V. All MCD
machines are factory wired to operate on 230V.
Motor leads must be changed during installation
for operation at 460V.
Installation and start-up must be performed
by a Signode Service Engineer, assisted by
plant personnel. Until the Engineer's
arrival, the machine must remain in its
shipping crate.
MCD POWER STRAPPING MACHINE
WITH DISPENSER AND MODULAR CHUTE SYSTEM
For Parts & Service 1-877-862-6699
To Next Page
Loading...
