Silca Bravo Maxima II - Guide to the Manual

Operating manual - English BRAVO MAXIMA II
Copyright Silca 2011 1
GUIDE TO THE MANUAL
This manual is a guide to the use of BRAVO MAXIMA key-cutting machine .
Read it carefully; it is essential if you wish to operate your machine safely and efficiently.
C ONSULTATION
The contents of the manual are divided into sections relating to:
- Transport and handling ............................................................................................... Ch. 1
- Description of machine and safety devices ................................................................ Ch. 2-3-4
- Proper use of machine ............................................................................................... Ch. 5-6
- Cleaning and Maintenance ......................................................................................... Ch. 7
T ECHNICAL TERMS
Common technical terms are used in this manual. To assist those with little experience of key cutting,
below is an illustration of the terms used for the different parts of keys.
Fig. 1
1) Head
2) Rim
3) Stop
4) Stem
5) Tip
6) Back
7) Cuts
8) Stem
2
1
5
7
3
6
4
1
3
5
7
2
1
8
5
3