UNOCODE 299 Operating manual - English
6 Copyright Silca 2002
1.4 TECHNICAL DATA
Electricity supply:
230V-50Hz (110V-60Hz) (100V - 50/60Hz)
Maximum absorbed power:
230V: 2 Amp. 250 Watt - 110V: 3,6 Amp. 250 Watt
cutter motor:
single phase and speed
cutter:
HSS (high speed steel) - optional hard metal carbide cutter
Tool speed:
• 50Hz: 1150 rpm (+/- 10%) - 60Hz: 1100 rpm (+/- 10%)
with pulleys inverted:
• 50Hz: 1830 rpm (+/- 10%) - 60Hz: 2700 rpm (+/- 10%)
Movement:
on 2 axes with ball screws activated by step motors, on rectified roller guides.
Clamp:
universal 4 sided clamp to grip flat, car and cruciform keys
Runs:
X axis: 57 mm Y axis: 32 mm
Dimensions:
width: 500 mm depth: 500 mm height: 420 mm (with raised shield 650 mm)
Mass:
34,5 kg
Noise level:
sound pressure Lp(A) = 85 dB(A) (cutting steel keys)
To Next Page
Loading...
