EasyManua.ls Logo

Silca Unocode 299 - 7.3 CUTTER REPLACEMENT

Silca Unocode 299
67 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UNOCODE 299 Operating manual - English
50 Copyright Silca 2002
7.8 ACCESS TO BACK COMPARTMENT
To gain access to the back compartment, proceed as follows:
1) turn the machine off and unplug it from its power supply cable.
2) unscrew the 6 (M1) screws that secure the back panel (fig. 43) thus removing it.
Fig. 43
7.9 ACCESS TO BOTTOM COMPARTMENT
To gain access to the bottom compartment, proceed as follows:
1) turn the machine off and unplug it from its power supply cable.
2) turn the machine on its back side.
3) remove the machine’s bottom panel by unscrewing the 8 (L1) screws.
Fig. 44
M1
L1

Related product manuals