Silca Unocode 299 - Keyboard; Display Replacement

Operating manual - English UNOCODE 299
Copyright Silca 2002 49
7.7 KEYBOARD/DISPLAY REPLACEMENT
1) turn the machine off and unplug it from its power supply cable.
2) remove the display’s support, by unscrewing the 3 (B1) fixing screws (fig. 41).
3) detach the flat cable and ground wire from the keyboard (fig. 42).
4) unscrew the keyboard’s fixing nuts and remove the keyboard from its support.
5) fit the new keyboard/display, repeating the operations described above, backwards.
Fig. 41
Fig. 42
B1