EasyManua.ls Logo

Silencer 75SL - Disarming Without a Transmitter; Valet Mode; Enter Valet Mode; Exit Valet Mode

Silencer 75SL
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UM_FULL_75SL_REV_A 11
K. DISARMING WITHOUT A TRANSMITTER
Number of presses ___
1. Turn the ignition on.
2. Press and release the button on the valet switch the correct number of times (the default is one press).
3. After a few seconds, the siren output ceases, and the system is disarmed.
L. VALET MODE:
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the
system from remote starting and disables all alarm functions.
Enter Valet Mode: (Manual)
a). Under disarm mode, turn the ignition to “ON/ OFF/ ON” position.
b). Press and hold valet switch for 2 seconds until the LED turns “ON” solid and icon will show on the LCD.
The LED will remain on as long as the system is in Valet Mode.
Exit Valet Mode:
a). Turn ignition “ON/ OFF/ ON”.
b). Push and hold the valet switch for 2 seconds. The LED will turn off indicating the system is exiting the Valet Mode.
Enter Valet Mode: (Using the remote control)
a). Under disarm mode.
b). Tap the F button 1 time, and nally tap the button. The parking lights will ash once, the remote will read “Valet
On” and icon will show on the LCD.
Exit: Repeat this process to exit valet mode. The parking lights will ash twice, remote read “Valet Off”
and icon will disappear conrming valet mode is disabled.
M. CAR LOCATOR:
Under armed mode, press the button to activate the car locator function. The siren will chirp 6 times.
The parking light will ash 12 times, assisting you in easily locating your car.
N. DRIVER PAGING / LOST & FOUND. (For two-way transceiver operation only)
This feature is useful in the event that someone wants to page the driver of a parked vehicle or someone
cannot nd his LCD remote transceiver.
Under the ignition switch “OFF” condition, press and hold the valet switch for 2 seconds to page the driver.
One chirp sound is emitted from the vehicle, a paging melody will continue to sound and the icon will
ash on the LCD screen.
O. DOME LIGHT CONVENIENCE SUPERVISION
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will ash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.

Table of Contents

Related product manuals