Silencer 75SL - Silent Arming; Shock Sensor Bypass; Tilt Sensor Bypass; All Sensor Bypass

UM_FULL_75SL_REV_A 9
SILENT ARMING: Press and hold the transmitter buttons for 1.0 second. This will arm your security system
without a chirp. Arm conrmation will be through the vehicles parking lights only.
SHOCK SENSOR BY-PASS: Press the button two times within 5 seconds will arm the security system and bypass
warn-away and shock sensor and the shock sensor icon will disappear on the LCD screen.
Note: The bypass feature is programmed to activate for one arming cycle only. The security system will return to
normal operation during the next arming cycle.
TILT SENSOR BY-PASS: Press the button rst then press button within 3 seconds will arm the security system
and by-pass the tilt sensor and the tilt sensor icon will disappear on the LCD screen.
ALL SENSOR BYPASS: Press button 2 times then release the button and press button. It will arm the security
system and bypass all sensors, the icon and icon will all disappear on the LCD screen.
HIDDEN ALARM FUNCTION: The security system will arm and with “Hidden Alarm Function”, the siren / horn will be
silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter.

Press the button rst. Within 3 seconds press the button to will Arm the security system and activate the
hidden alarm function and the hidden alarm icon will show on the LCD screen.
G. PASSIVE ARMING:
Active arming / disarming is controlled by your security system via the remote transmitter. This security system is
equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last
door is closed. Operation is as follows:
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will ash fast for 30 seconds. If you reopen any door / hood
/ trunk, the security system LED will stop ashing. It will begin ashing again once all vehicle entrances are closed.
3. After the 30-second time has elapsed, the security system will automatically “ARM”. The icons and beeps
play to conrm. The siren will chirp [1] time and the parking lights will ash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING: The vehicle doors will automatically lock after the passive
arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system is disarmed, press the button twice. The system will respond
with [1] chirp and LED will turn “Off”. The security system will remain in this temporary state for as long as you wish.
To exit Passive arming by-pass, press the transmitter or button and the system will return to normal status.
H. ACTIVE DISARMING – UNLOCK & DISARM
1. Press the button on the transmitter.
2. The siren will chirp twice and the parking lights will ash twice indicating that the security system is now disarmed.
The icon and beeps play to conrm. If Valet Mode* is ON, the doors unlock and the + icon and tone
play on the LCD transceiver. Exit Valet Mode to arm the alarm normally.
3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming.
(Note: Power door locks and dome light must be installed with the security system.)
SILENT DISARMING: Press and hold the transmitter buttons for 1.0 second. This will disarm your security system.
No chirp sound will be heard and the disarm conrmation will be through the vehicles parking lights only,