Silencer 75SL - Timer Start Operation; Hour Repeat with Cold Starting; Activate Timer Start on; off; Daily Timer Start

UM_FULL_75SL_REV_A 16
G. Disabling The Remote Start System: (If Installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from being
remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area.
To disable the remote start, move the optional remote start enable toggle switch to the “OFF” position.
H. Timer Start Operation
This feature is designed to allow the user to have the 75SL automatically remote start at the end of a selected
timed cycle. (Runtime interval based on feature 3-05 option setting, and temperature start setting based on
feature 3-012 and 3-13) It also be controlled by the thermistor so it will start at a specied temperature at the
end of the timed cycle. The running time interval and start temperature will display on 2 ways LCD remote
to conrm temperature timer start is set.
24 hour repeat with cold starting:
This option is designed to monitor the temperature 24 hrs. After timer mode is set (see feature 3-05) and start if it
is at or below the preset cold start temperature (see feature 3-12). This process will continue until the user manually
starts or remote starts the vehicle. 24 hrs. digital will display on 2 ways LCD remote to conrm 24 hour repeat with
cold starting is set.
Activate Timer start on / off
Depress F button rst then press button or Press the button rst, within 2 seconds presses the button to
activate timer start (or if ON, deactivates). A chirp from siren and the parking light ashes 3 times and the timer start
icon or the timer start with temperature icon and the or /or text and tone play on the
LCD transceiver.
Note: For Timer Start and Daily Timer Start:
1. This will be repeated in 24 hours.
2. Manually starts or remote starts the vehicle will cancel the timer start.
3. 2 chirps from siren indicate fail to setting and the text and tone play on the LCD transceiver.
IMPORTANT: Timer Start and Daily Timer Start should be used only in open areas, never start
and run the vehicle in on enclosed space as a garage or carport.
Contact your installer to reprogram this feature if needed.
I. Daily Timer Start:
This option will allow the user to set a predetermined time to remote start on the 2 way LCD remote. Sets the time
which you would like the start the vehicle rst (predetermined time based on LCD programming 2 setting)
Note: it is important that the remote time is as accurate as possible when activating the timer mode to ensure
that it will start at the desired time.
Activate Daily timer start on / off:
Depress F button 2 times rst then press button (or if ON, deactivates). The parking light ashes
5 times and the icon and the text and tone play on the LCD transceiver to conrm
activates predetermined time start. The vehicle is now programmed to start at the same time of the next day.
Repeat the same step to turn off daily timer start mode.