UM_FULL_75SL_REV_A 4
LCD REMOTE CONTROL TRANSCEIVER:
A. CHANGING THE BATTERY
BATTERY REPLACEMENT: SLRF752
The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens the
icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to indicate
the power is back up on the transmitter.
BATTERY REPLACEMENT: SLRF751
The One-way remote is powered by one CR2032 Battery. To replace the battery, use a coin or
small at blade screwdriver to carefully pry apart case
Small Flat Blade
Screwdriver or Coin
To Next Page
Loading...
