Silencer 75SL - Ignition Control Door Lock;Unlock; Trunk Release (aux 1) Output; Aux 2 Timer Control Output; Aux 3 Timer Control Output

UM_FULL_75SL_REV_A 12
P. IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles door locks have been interfaced to the security system, the system will automatically
lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when
the ignition is turned “OFF”.
Q. TRUNK RELEASE OUTPUT. (AUX 1 / CH 1)
Press and hold the button on the transmitter for 3 seconds until the beep conrms and then release
the button to remotely control the trunk release and the icon will show on LCD screen.Aux 1 is a
user-programmable timer output. You may program the built-in timer to send a ground signal for any
time duration from 1 second to 90 seconds. For instance, this timer output may be used to turn on the
headlights, power windows or sunroof.
Programmable Output: Trunk (1 second pulse) / Aux 1 Latch / Aux 1 Latch Reset with Ignition / Aux 1 Flex
(Aux 1 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)
Latch: when the Aux 1 command is received the output will turn ON and remain ON and the text and tones
play to conrm until the command is received again and text will be displayed on the LCD screen.
Latch/Reset/Ignition: when the Aux 1 command is received the wire will turn ON and remain ON until the ignition is
turned ON & OFF or the command is received again and text will be displayed on the LCD screen.
Flex: when the Aux 1 command is received, the output will turn ON for the programmed time duration (default 1sec.).
Aux 1 (CH 1) Output Control:
1. Control by Remote: This option allows Aux 1 (output time based on feature 2-13) to be triggered by remote
control command and press and hold buttons for 3 seconds until the beep conrms and then release
the button to activate Aux 1 function and the text and tones play to conrm.
2. Control by Arm: The Aux 1 output will activate for the Arm command. If you send a second lock/arm
command it will not trigger Again.
3. Control by Disarm: The Aux 1 output will activate for the Disarm command. if the vehicle is already in the
unlocked/disarmed state and you send a second unlock/disarm command it will not trigger the output
4. Control by Arm and Disarm: the Aux 1 output will activate for the Arm & Disarm commands.
5. Control by Remote Start: the Aux 1 output will activate for any Remote Start activation.
R. AUX 2 (CH 2) TIMER CONTROL OUTPUT. (Optional Feature)
Press F button rst then press button or press buttons + simultaneously to activate Aux 2 function and
text and tones play to conrm. Aux 2 is a user-programmable timer output.
Programmable Output: Aux 2 Latch / Aux 2 Latch Reset with Ignition / Aux 2 Flex
(Aux 2 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)
S. AUX 3 (CH 3) TIMER CONTROL OUTPUT. (Optional Feature)
Press F button 2 times rst then press button or press the buttons + simultaneously to activate Aux 2
function and. the text and tones play to conrm. Aux 3 is a user-programmable timer output.
Programmable Output: Aux 3 Latch / Aux 3 Latch Reset with Ignition / Aux 3 Flex
(Aux 3 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)