25
422348-Evolution ST350-Instruction manual-usa-rev01_AN
Sound
At the end of each insertion, the unit beeps to indicate that it is safe for the needle to be removed from the follicle. If
you wish to use the visual “satellite” signal, the beep can be silenced by pressing the “Beep” key.
Note: When the “Beep” sound is off, the flow of current can be monitored using a satellite which will turn on its red
light intermittently each time the current is activated using the pedal.
Screen brightness
his key serves to adjust the brightness of your screen. The screen is set at maximum brightness by default. If you wish
to dim the screen, press the key repeatedly until the desired brightness is reached. Brightness will loop around from
high to low when the highest setting is reached.
Wi-Fi configuration and Update
NEVER TOUCH WIFI configuration and Update keys as this risks altering your configuration
screen and the programming of your device.
To Next Page
Loading...