EasyManua.ls Logo

Silhouet-Tone EVOLUTION ST 350 - After Sales Service; Technical Specifications

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
422348-Evolution ST350-Instruction manual-usa-rev01_AN
14. After sales service
The device EVOLUTION ST350 is guaranteed 2 years excluding accessories.
We advise you to always have a filament holder in advance, this element being major for your practice.
• Follow the troubleshooting guide if a problem should occur.
• If the problem persists, contact your local Silhouet-Tone service representative.
When contacting service, mention the serial number of your device on the back of the device,
the date of purchase and the name of the distributor that sold the device to you.
We recommend that you keep the complete basic packaging of your device in case of return of
the device (boxes and shims)
15. Technical specifications
Electrolysis
• Sequential Galvanic Current adjustable in intensity from 0.00 to 3.00 mA.
• Duration of the passage of the current adjustable in seconds from 0 to 6 seconds.
• Indicator light during the current passage time (on the body of the device and the Satellite).
Audible signal at the end of the current passage time represented by the green LED.
Thermolysis
• 1 Frequencies available: 6.78 MHz
• Intensity adjustable from 0 to 150% (algorithms) depending on the body parts, areas and size of the hair
to be treated.
• Duration of the passage of the current adjustable in seconds from 0 to 6 seconds.
Adjustable number of pulses (répétitions x2).
• Indicator light during the current passage time (on the body of the device and the Satellite).
Audible signal at the end of the current passage time represented by the red LED.
BLEND - Combined Currents
• Sequential current adjustable in intensity from 0.00 to 3.00 mA.
• Duration of the passage of the current adjustable in seconds from 0 to 6 seconds.
Adjustable intensity from 0 to 100%.
• Duration of the passage of the current adjustable in seconds from 0 to 6 seconds.
• Indicator light during the current passage time (on the body of the device and the Satellite).
Audible signal at the end of the current passage time represented by the red and green LEDs.