32
422348-Evolution ST350-Instruction manual-usa-rev01_AN
IN PRE-PROGRAMMED MODE:
• 9 body zones
• 7 face zones
PROGRAMS – In hair size mode:
• Very fine, fine, medium, coarse, very coarse
PROGRAMS – In manual mode: settings to zero.
FILAMENT HOLDER: 2 different references, each of the references being only compatible with isolated and
uninsulated needles of size F.
Enable interchangeable current: Auto start or start by activating the pedal.
Detection time: Adjustable in seconds from 0.00 to 5.00 s.
ANAPHORESIS AND CATAPHORESIS:
• Direct galvanic current adjustable in intensity from 0.00 to 3.00 mA
• Inversely of the automatic polarization by the device.
Reverse of polarity: Automatic.
Indicator light: During the current passage time (on the body of the device and the Satellite).
Audible signal: At the end of the time of the passage of currents.
Language: Device available in 2 languages: French and English. By default it is delivered in English.
Hourglass and Stopwatch: Calculation of processing time up to 16 hours.
Processing time: Enable manual or pedal.
In real time: 0 at the end of the zone treatment, determined by the electrolyst. The device tells you the end of the
treatment at 3 minutes from the end by a sound signal + a final sound signal at 0.
In hourglass mode: Enter the estimated treatment time before starting.
Audible signal: Adjustable in 2 levels: ON or OFF
To Next Page
Loading...