Silicon Image SATA RAID - Toolbar and Menu Commands

Copyright © 2003 Silicon Image Inc. SATARaid User’s Manual
34
Event Viewer and Events Windows
The Event Viewer and Events Windows display SATA device-related events that occur while SATARaid is running. Selecting
categories in the Event Viewer window applies a filter to the Events window so that only messages of the type selected are
displayed. This allows only Warning or Error messages to be seen, for example.
SATARaid Toolbar and Menu Commands
The Toolbar buttons from Left to Right are:
A – RAID Management
B – System View
C – Configure SATARaid
D – Send Configuration
E – Save Configuration
F – Copy Configuration
G – SATARaid Help
All options available via the Command Menu are replicated on the toolbar except Exit and About SATARaid. The Menu
commands are shown below
File Advanced Help
Save Configuration RAID Management SATARaid Help
Copy Configuration System View About SATARaid
Exit Configure SATARaid
Send Configuration
The commands are documented on the pages that follow.