SDBT 2400 A1
GB
│
IE
│
15 ■
Vertical ironing with steam blast
1) Allow the steam iron to heat up until the heat indicator LED 8 lights up
continuously.
2) Hang the garment to be ironed on a hanger hanging from a heat-resistant surface.
3) Hold the steam iron in a vertical position a few centimetres in front of the garment.
4) Briefly press the steam blast button
4 several times at intervals of approx.
5 seconds
(see Fig. 7).
Easy
-
Fill
Fig. 7
5) Touch the garment lightly with the soleplate
q
and steam it to remove
wrinkles.
Spray function
ATTENTION!
► Do not use the spray function on silk garments. This may cause water stains
on the clothing.
Note
► Use the spray function
for very dry, heavily creased laundry.
► You can use the spray function when steam ironing and when dry ironing.
1) Allow the steam iron to heat up until the heat indicator LED 8 lights up
continuously.
2) Point the water jet
1
at the part of the garment you want to moisten.
To Next Page
Loading...
