SDBT 2400 A1
GB
│
IE
│
17 ■
Anti-drip system
The steam iron has an anti-drip system to prevent water from dripping from the
soleplate
q during ironing. This could otherwise happen if the heating tempera-
ture is still too low and thus no water vapour can develop.
Note
► When the anti-drip function is active, you will hear a clicking sound, especially
during the heating or cooling phase. This noise is due to the design and
indicates the correct functioning of the anti-drip system.
Cleaning
DANGER! RISK OF ELECTRIC SHOCK!
► Always unplug the appliance before cleaning it.
There is a risk of electric shock!
WARNING!
► Allow the steam iron to cool down before cleaning it. Otherwise, there is risk
of burns!
Cleaning the housing and soleplate
ATTENTION!
► Do not use abrasive, aggressive or chemical cleaning agents. These can
damage the surface and the soleplate q of the steam iron.
Ƈ Clean the housing and the soleplate
q with a slightly damp soft cloth.
If necessary, use a mild, non-abrasive cleaning agent.
Ƈ Allow the steam iron to dry completely before using it again.
To Next Page
Loading...
