Silvercrest SDBT 2400 A1 - Putting the Steam Iron down; After Use

SDBT 2400 A1
■ 16
│
GB
│
IE
3) Press the button for the
spray function 5 (see Fig. 8).
Easy
-
Fill
Fig. 8
Putting the steam iron down
WARNING!
► Never leave the hot steam iron connected to the mains socket unattended.
1) Slide the steam control
3 all the way up to position 0 (no steam).
2) Always place the steam iron on the base 0 when not in use.
After use
1) Slide the steam control 3 all the way up to position 0.
2) Pull the mains plug out of the mains socket.
3) Stand the steam iron on its base
0 and allow it to cool down completely.
4) Empty the water tank
e via the filling opening Easy-Fill 2 and clean
the iron soleplate q (see section Cleaning the housing and iron
soleplate).
5) Place the steam iron back on the base
0.