EasyManua.ls Logo

Silvercrest SHFR 1450 A1 - Appliance Programmes; Setting Programmes

Silvercrest SHFR 1450 A1
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
IE
NI
CY
11
SHFR 1450 A1
NOTE
Check the cooking process regularly. The times given in the table and the
preprogrammed values in the appliance are orientation guides. The actual
cooking times can vary depending on the characteristics of the food.
You can open the lid
during cooking to check on the cooking progress
or to add ingredients. When you open the lid , the heating element
switches off until the lid is closed again.
You can manually adjust the time and temperature while cooking by press-
ing the SET button and continuing as described above.
To stop cooking at any time, press and hold the ON/OFF button button
for approx. 3 seconds. The appliance will switch back to standby mode;
the display lights up blue.
Use the supplied stand - when you put down the hot cooking container .
Programmes
The appliance has eight preset cooking programmes. If you select one of the
following programmes, the preset cooking times and temperatures will be shown
on the display . These settings can be adjusted to certain degree depending
on the recipe you are using or your personal taste.
The three manual programmes offer further customisable presets for those times
when none of the other programmes are suitable. You can use them for your own
recipes, for example, or for keeping food warm.
NOTE
The possible setting range for temperature and time varies depending on
the programme. See the following table.
How to set a programme:
1) Choose a suitable programme, as described in the section Before first
use.You will find all the settings of the preset programmes in the following
table.
2) Press the ON/OFF button to start immediately or adjust the time and temper-
ature according to your needs, as described in the section Preparing food.

Table of Contents

Related product manuals