Silvercrest SKMK 1200 A1 - Operating the Buttons

46
GB
9.4 Operating the buttons
Illumination/Flashing of
the button(s)
Situation Function of the button
START/STOP17 flashes.
Settings were performed,
and a cycle can be started.
Press the button to start a cy-
cle.
START/STOP17 lights up.
The cycle is in operation. Press the button to stop a cy-
cle.
TURBO18 lit white.
Turbo function can be acti-
vated.
Keep the button pressed as
long as the function is need-
ed.
TURBO18 lit red.
The function is blocked (e.g.
because the food tempera-
ture inside the blender jug
exceeds 60 °C).
The button is blocked.
Program button
(AMASAR22,
VAPORERA21,
REHOGAR20) lights up
and START/STOP17
flashes.
The programme is selected
but not yet started.
Press START/STOP17 to
start the function.
Program button
(AMASAR22,
VAPORERA21,
REHOGAR20) lights up
and START/STOP17 lights
up.
The programme is selected
and started.
In order to abort the pro-
gramme early, press
START/STOP17.
Program button
VAPORERA21 flashes
and START/STOP17 lights
up.
The programme is selected
and started. However, the
heat-up time of 10 minutes is
still ongoing.
The programme starts auto-
matically.
- The timer24 can be
used to change the pre-
set time.
- In order to start the pro-
gramme before the
10minutes expired,
press VAPORERA
21.
BALANZA/TARA23
lights up.
The scale is activated.
In order to set the weight indi-
cator to 0, press
BALANZA/
TARA
23.
BB&3(B(6ERRN6HLWH)UHLWDJ-XQL