53
GB
5. Use the main switch6 to switch on the
device.
6. Use the timer 24 to set the desired
time.
7. Use the temperature controller
15
to
set the desired temperature, e.g. 100°C
for cooking.
The display25 shows the time set and the
selected temperature.
8. Select the speed setting 1 for an even
distribution of the heat in the water.
9. Press the button START/STOP17. The
device starts to operate.
10.After the set time has elapsed, a signal
sounds and the illumination of the but-
ton goes off.
11.Press the main switch6 to switch off the
device.
10.8 Using the spatula
The spatula30 is used to stir the ingredients
and to remove the cooking pot28.
CAUTION:
~ The spatula30 must not be used with
the mixer attachment29 in place. Oth-
erwise, the spatula30 might be caught
in the mixer attachment29.
~ Do not use any other kitchen utensil to
stir the ingredients. The utensil might get
into the blades and cause damage.
• Always stir clockwise. The spatula30
is designed such that when stirring
clockwise it cannot come into contact
with the blade assembly27 even if that
is running.
The hook on the rear of the spatula30 can
be used to remove the hot cooking pot28
without having to touch it directly. Simply
hook on the metal bracket of the cooking
pot28 and pull it out upwards.
TEMP.
TEMPO
BB&3(B(6ERRN6HLWH)UHLWDJ-XQL