48
GB
9.7 Setting the speed
Turn the speed controller 16 to set the
speed:
- The speed can be adjusted in 10 incre-
ments:
- Speed 1 - 4: for the mixer attach-
ment29;
- Speed 1 - 10: for the blade assem-
bly27.
CAUTION:
~
The mixer attachment
29
must
only be used with speed settings
1 to 4. On the display
25
, a re-
spective indication appears.
~ When mixing liquids at speed 10, the
blender jug5 must not contain more
than 1 litre, since otherwise liquid might
be ejected (see “Using the blender jug”
on page 50). For speed settings of less
than 10, the blender jug5 may only be
filled up to a maximum of 2.2 litres.
- For further notes: see “Functions in an
overview” on page 38.
- The speed set is shown on the dis-
play25.
- During operation, the speed setting can
be changed.
- The speed cannot be set for the Steam-
ing function.
- If during operation you change the
speed to 0, the device will stop. To con-
tinue working, select a speed and press
the button START/STOP17.
- If a temperature has been selected, only
the speed settings 1 - 3 are available.
Soft start
In order to avoid that during sudden acceler-
ation of hot food liquid is ejected from the
blender jug5 or the device starts wobbling,
a soft start is provided for all settings except
for the turbo function:
- Soft start for food temperatures exceed-
ing 60 °C.
9.8 Anti-clockwise rotation
The anti-clockwise rotation is used for gentle
stirring of food not to be chopped.
- By pressing button REVERSE19 the di-
rection of rotation of the blade assem-
bly27 can be changed in standard
operation at any time.
- The anti-clockwise rotation can only be
applied at low speed settings 1 to 3.
- For programmes KNEAD and ROAST,
the anti-clockwise rotation is controlled
by the programme.
• Press REVERSE19 to activate the anti-
clockwise rotation.
• Press REVERSE19 again to deactivate
the anti-clockwise rotation.
SPEED
SPEED
REVERSE
SPEED
*%B&3(B.XHFKHQPDVFKLQHB0&IP6HLWH)UHLWDJ-XQL
To Next Page
Loading...
