EasyManua.ls Logo

Silvercrest SKMK 1200 A1 - 14. Browning; General programme information; Starting the program; 15. Cleaning and servicing the device

Silvercrest SKMK 1200 A1
70 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
GB
14. Browning
With this programme, you can slightly
brown up to 200 g meat, fish, vegetables,
e.g. to release roasting flavours. Large piec-
es must first be cut up into chunks.
14.1 General programme
information
- Preset time: 7 minutes (adjustable)
- Maximum time: 14 minutes
- Preset temperature: 130 °C (adjustable)
- Preset speed: 1 (fixed)
- Clockwise/anti-clockwise rotation: is
controlled by the programme
14.2 Starting the program
1. Put some fat (e.g. oil) into den blender
jug5.
2. Fill food into the blender jug5.
3. Close the blender jug5 with the lid32.
4. Use the main switch6 to switch on the
device.
5. Press the button REHOGAR20. The
button REHOGAR20 lights up and the
programme values are shown on the
display25.
6. Press the flashing button START/
STOP17.
The programme is started. The time set is
counted down on the display25. The
button REHOGAR20 lights up. The
programme controls the anti-clockwise
rotation automatically. At a fixed inter-
val, the blade assembly27 starts for a
brief anti-clockwise rotation.
7. After the time set elapsed, a short signal
sounds, the buttons START/STOP17
and REHOGAR20 go off and the dis-
play25 shows all values with 0 (except
for the temperature).
8. Press the main switch6, to switch off
the device or move to the next step in
the recipe.
15. Cleaning and
servicing the device
DANGER! Risk of electric
shock!
~ Disconnect the mains plug7 from the
wall socket before any cleaning.
~ Never immerse the base unit12 in wa-
ter.
DANGER! Risk of injury from
cutting!
~ Please remember that the blades of the
blade assembly27 are very sharp.
Never touch the blades with your bare
hands, to avoid cuts.
~ Before removing the blade assem-
bly27, rinse the blender jug5 with wa-
ter and remove scraps of food from the
blades so that the blade assembly27
can be removed safely.
~ When washing manually, the water
should be sufficiently clear so that you
can see the blade assembly27 easily
to avoid injuries caused by the very
sharp blades.
VEL.
MARCHA ATRÁS
TEMP.
TEMPO
BB&3(B(6ERRN6HLWH)UHLWDJ-XQL

Table of Contents

Related product manuals