Silvercrest SKMK 1200 A1 - Device Handling and Safety

49
GB
9.9 Turbo function
CAUTION:
~ When mixing liquids, the blender jug5
must not contain more than 1 litre, since
otherwise liquid might be ejected.
~ Never use this function when the mixer
attachment29 is used.
With the turbo function you can briefly select
speed setting 10 (maximum). This, for exam-
ple, is used to quickly chop nuts, small
amounts of herbs or onions.
- TURBO18 lit white: the function is
possible.
- TURBO18 lit red: the button is
blocked, the function is disabled (e.g.
because the food temperature inside the
blender jug exceeds 60 °C).
• Press and keep button TURBO18
pressed for as long as you need the
function.
NOTES:
• The turbo function will only work
- if the blade assembly27 is not turn-
ing.
- if the food temperature in the blender
jug5 is less than 60 °C.
• The speed is promptly increased to set-
ting 10 (maximum).
9.10 Overflow
In the holder of the blender jug9 there is an
overflow hole10.
Should liquid escape from the blender
jug5, this will not collect in the base
unit12, but can escape via the overflow
hole10 onto the surface.
9.11 Starting and stopping
the device
• After setting one or more values or a
programme, start the device by pressing
button START/STOP17.
• By pressing button START/STOP17
again, you abort an ongoing cooking
or processing process.
VEL.
10
BB&3(B(6ERRN6HLWH)UHLWDJ-XQL