To Next Page

To Previous Page

■ 10

│

SKR 800 C3

Disposal of packaging

The packaging protects the device from damage during transport. The packaging

materials have been selected for aspects of environmental friendliness and

disposal, and they are therefore recyclable.

Returning the packaging to the material cycle conserves raw materials and

reduces the amount of waste that is generated. Dispose of packaging materials

that are no longer needed in accordance with applicable local regulations.

Dispose of the packaging in an environmentally friendly manner.

Note the labelling on the packaging and separate the packaging material

components for disposal if necessary. The packaging material is labelled with

abbreviations (a) and numbers (b) with the following meanings:

1–7: plastics,

20–22: paper and cardboard,

80–98: composites

NOTE

► If possible, keep the original packaging for the complete warranty period

of the device so that the device can be packaged properly for return ship-

ment in the event of a warranty claim.

Requirements for the set-up location

For the safe and trouble-free operation of the device, the set-up location must

fulﬁl the following requirements:

■ When setting up the device, place it on a ﬁrm, ﬂat and horizontal surface.

Use the fold-out adjustable foot

■ The surfaces of some items of furniture might contain components that can

corrode and soften the rubber feet of the device. If necessary, place a mat

under the device’s rubber feet.

■ Set up or mount the device in such a way that the provided ventilation

openings and speakers

s are not covered.

■ Do not operate the device in a hot, wet or extremely damp environment or

in the vicinity of ﬂammable materials.

■ The mounting location must be selected so that the device is not exposed

to vapours. Do not install the device directly over a hotplate.

■ The mains socket must be easily accessible so that the plug can be easily

pulled out in an emergency.

Silvercrest SKR 800 C3 User Manual

Questions and Answers: