Silvercrest SKR 800 C3 User Manual

GB
│
IE
│
NI
│
21 ■
SKR 800 C3
Fault Possible cause Remedy
No automatic
setting of time and
date.
The RDS signal is too weak.
The time and date will need to be
manually set.
NOTE
► If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see section "Service").
Cleaning
DANGER
Risk of fatal injury from electrocution!
► Remove the plug from the mains socket before starting to clean the device.
CAUTION
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
Cleaning the housing
♦ Clean the surfaces of the device with a soft, dry cloth.
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn
dirt residues.
Storage when not in use
♦ If you do not intend to use the device for an extended period of time,
disconnect it from the power supply, remove the batteries and store it in
a clean, dry place without exposure to direct sunlight.

Silvercrest SKR 800 C3 Specifications

General

Brand	Silvercrest
Model	SKR 800 C3
Category	Radio
Language	English