Silvercrest SKR 800 C3 User Manual

GB
│
IE
│
NI
│
13 ■
SKR 800 C3
♦ Insert 2 x 1.5V batteries of the type AA/Mignon/LR6 (not included in the
product) into the battery compartment
d. When doing so, note the
polarity signs in the battery compartment
d.
♦ Then close the battery compartment
d by replacing the cover and clicking
it into place.
FM wire aerial
♦ Completely unwind the wire aerial i for FM radio reception.
Handling and operation
Making basic settings
Requirement: The device is in clock/standby mode.
NOTE
► If there is a suitably strong RDS signal (radio data system), the time and
date will be set automatically. Neither an adjustment of summer/winter time
is made automatically by the RDS nor does the station name appear on the
display
4.
► Make the settings quickly. If you do not press a button for 15 seconds,
the entry will be cancelled. All settings made up to this point are saved
automatically.
♦ Press the
button 0 for about 2 seconds. The symbol for the 24-hour
format ( ) flashes on the display 4.
♦ Turn the −TIMER+ dial 8 to the right or left to switch between 24-hour
( ) and 12-hour format ( ).
NOTE
► If the 12-hour format (
) is set, PM appears in the upper left of the display
4 from 12:00 PM until 11:59 PM. From 12:00 PM to 11:59 AM, nothing
appears on the display 4.
♦ Press the
0 button to accept the setting. The hour flashes on the display 4.
♦ Turn the −TIMER+ dial 8 left or right to set the hours.
♦ Press the 0 button to accept the setting. The minutes flash on the display 4.
♦ Turn the −TIMER+ dial
8 dial left or right to set the minutes.
♦ Press the 0 button to accept the setting. The year date display flashes
on the display 4.
♦ Turn the −TIMER+ dial 8 left or right to set the year.
♦ Press the
0 button to accept the setting. The month date display flashes
on the display 4.
♦ Turn the −TIMER+ dial 8 left or right to set the month.

Silvercrest SKR 800 C3 Specifications

General

Brand	Silvercrest
Model	SKR 800 C3
Category	Radio
Language	English