■ 6
│
GB
│
IE
│
NI
SKR 800 C3
■ Check the device for visible external damage before use. Do not operate a
device that has been damaged or dropped.
■ If the cables or connections are damaged, have them replaced by authorised
specialists or Customer Service.
■ Keep the power cable away from hot surfaces and sharp edges. Ensure that
the power cable is not stretched tightly or kinked. Do not allow the cable to
dangle over edges (tripwire effect).
■ All repairs must be carried out by authorised specialist companies or
Customer Service. Improper repairs may put the user at risk. It will also
invalidate any warranty claims.
■ Defective components must always be replaced with original replacement
parts. It is ensured only for these parts that they fulfil the safety requirements.
■ Do not make any unauthorised modifications or alterations to the device.
■ Always place the device on a stable and level surface. It can be damaged
if dropped.
■ Do not expose the device to direct sunlight or high temperatures.
Otherwise it may overheat and be irreparably damaged.
■ Be sure to provide sufficient air circulation to avoid a heat build-up.
Never cover the device. There is a fire hazard!
■ Do not place the product near heat sources such as radiators or other
heat-generating devices.
■ Keep the device away from open flames (e.g. candles) at all times.
■ The device is not designed for use in rooms with high temperature or humidity
(e.g. bathrooms) or excessive dust.
■ Protect the device from spray or dripping water. Never submerge the device
in water, do not place the device near water and do not place any object
filled with liquid (e.g. vases) on top of the device.
■ If you notice a burning smell or smoke, pull out the plug from the mains
socket immediately and remove the batteries.
■ In the event of malfunctions and thunderstorms, disconnect the plug from the
mains socket.
To Next Page
Loading...
Need help?
General
