21
Code Functions
Code Setup Options:
There are four ways to program the device codes in the
CODE SETUP menu.
(Code Setup Menu Structure)
Choosing device codes via the display
Turn the device on.
Hold down the setup (17) button
for about 3
seconds until is shown.
Press OK (12) .
appears on the display.
Press OK (12) .
will be shown on the display.
Press the appropriate source button (2) (TV, VCR,
CBL, ASAT, DSAT, DVD, AUX1, CD, AMP, AUX2).
The display will then show
.
To Next Page
Loading...
