43
Setting the sleep timer
Hold down the setup button (17) for about 3
seconds until is shown
Press the setup button (17) twice more to bring
up the menu.
Press OK (12) . The display will show the
menu.
Press OK (12) . The display will show .
Press OK (12) . The minutes will flash on the
display .
Enter the time after which the TV should automatically
turn itself off by using the navigation buttons (13) .
Press OK (12) . The confirmation message
will appear along with the TV timer symbol "Zzz" on the
display.
Leave the remote control in such a position so that there
is nothing between it and the device.
To Next Page
Loading...
