40
Hold down the setup (17) button for about 3
seconds until is shown.
Press the setup button (17) once more to bring
up .
Confirm with OK (12) . The display will show
.
Select using the navigation buttons (13)
and confirm with OK (12) .
The current set time for the duration of the backlight
(factory setting - 10 seconds) will flash. Choose the
desired duration in five second intervals using the
navigation buttons (13) .
To turn off the backlight choose "00" seconds. Confirm
with OK (12) .
The confirmation message will appear and
the display reverts back to .
RESET - factory settings
On a reset all the device settings will revert back to the
factory settings. The programmed codes, learn functions
and macros will be deleted.
To Next Page
Loading...
