44
Turning the sleep timer off
When the sleep timer is already set ("Zzz" on the display)
appears on the display in the above described
steps instead of .
Follow the steps as described above.
The display will show . Press OK (12) .
The message appears.
Press OK (12) . The confirmation message
will appear.
Command timer
With the command timer you can program functions that
will be automatically carried out at a specific moment
within the next 24 hours.
Up to four commands can be saved but the first
command must always be the selection of a source
button (2).
In order to use this timer, the time must be set in the
remote control.
To Next Page
Loading...
