58
Carrying out macros
To carry out a macro briefly press the macro button
(15) once in normal mode. The notification
will appear.
Within 20 seconds press the number button (3) under
which the macro is stored ( , , or ).
Whilst the macro is being carried out, is
displayed (X=1,2,3) along with the transmitting symbol.
If there is no macro stored under the selected number
button (3) then the notification appears.
Deleting macros
Hold down the setup button (17) for about 3
seconds until is shown.
Press the setup button (17) four more times to
bring up the menu.
Press OK (12) to bring up mode.
Confirm with OK (12) .
To Next Page
Loading...
