Silvercrest URC 101 DT - System Reset to Factory Defaults

38
 The hour display will flash. Input the correct hour using
the navigation buttons (13) and confirm with OK
(12) .
 The minute display will flash. Input the correct minutes
using the navigation buttons (13) and confirm with
OK (12) .
 The confirmation message will be shown
and the display reverts back to .
If you have chosen to use the 12 HOUR CLOCK then the
post noon hours will be shown on the display with PM
after them.
Setting the date
 Call up as described above in "Setting the
time".
 Confirm with OK (12) . The display will show
.
 Choose the menu using the navigation
buttons (13) and confirm with OK (12) .
 The year will flash. Input the correct year using the
navigation buttons (13)
and confirm with OK (12)
.