37
Settings
The basic display shows the day of the week and the
time on the lower line.
If the setup button (17) is briefly pressed the date
will appear on the lower line for approximately 30
seconds.
Setting the time
Hold down the setup (17) button for about 3
seconds until is shown.
Press the setup button (17) once more to bring
up .
Confirm with OK (12) . The display will show
.
Select the menu using the navigation
buttons (13) and confirm with OK (12) .
The current time mode will flash. Choose a time mode
(12 or 24 hours) using the navigation buttons (13)
(HR = Hours) and confirm with OK (12) (see the
end of this section).
To Next Page
Loading...
