33
own volume control then an error message
will appear.
The remote control will then revert back to normal use.
Turning off Punch Through (VOL/MUTE) for a
certain device
You can set the universal remote control up in such a
way that a certain device will only use its own VOL/MUTE
functions. The "Punch Through" function for this device
will be disabled.
The universal function cannot be turned off in mode.
If you have chosen another mode for the VOL/MUTE
function, as described in the previous chapter, you
cannot turn the universal function off for this mode.
Hold down the setup (17) button for about 3
seconds until is shown.
Press the setup button (17) once more to bring
up .
Press OK (12) . The display will show .
To Next Page
Loading...
