SIMARINE VIA - Page 54

DE
8. Panel and Power Unit configuration
54
Panel and Power Unit configuration
8.
8. Panel and Power Unit configuration
VIA supports assigning which button controls which relay. User can either configure an identifier of a specific button or an
identifier of a specific relay.
You can adjust the buttons on MENU > DEVICES > CONTROL UNIT > SCC8 screen.
The default configurations are:
BUTTON 0
INSTANCE = 1
MODE = TOGGLE
SCREEN = OFF
BUTTON 1
INSTANCE = 2
MODE = TOGGLE
SCREEN = OFF
BUTTON 2
INSTANCE = 3
MODE = TOGGLE
SCREEN = OFF
BUTTON 3
INSTANCE = 4
MODE = TOGGLE
SCREEN = OFF
BUTTON 4
INSTANCE = 5
MODE = TOGGLE
SCREEN = OFF
BUTTON 5
INSTANCE = 6
MODE = TOGGLE
SCREEN = OFF
BUTTON 6