SIMARINE VIA - Page 55

DE
8. Panel and Power Unit configuration
55
Panel and Power Unit configuration
8.
INSTANCE = 7
MODE = TOGGLE
SCREEN = OFF
BUTTON 7
INSTANCE = 8
MODE = TOGGLE
SCREEN = OFF
The default mapping instance properties of the is therefore:
Make sure that the same instance property is not shared by multiple buttons.
You can adjust the relays (OUTPUTS) on MENU > DEVICES > POWER UNIT > SPU62 [...] > OUTPUTS screen.
The default configurations are:
OUTPUT 0
INSTANCE = 1
STARTUP STATE = OFF
OUTPUT 1
INSTANCE = 2
STARTUP STATE = OFF
OUTPUT 2