EasyManua.ls Logo

Simer 2945 - User Manual

Simer 2945
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
Submersible Sump Pumps
NOTICE D’UTILISATION
Pompes submersibles
pour puisard
MANUAL DEL USUARIO
Bombas sumergibles
para sumideros y efluentes
Installation/Operation/Parts
For further operating,
installation, or maintenance
assistance:
Call 800-468-7867 /
800-546-7867
English ...................... Pages 2-7
Installation/Fonctionnement/Pièces
Pour plus de renseignements
concernant l’utilisation,
l’installation ou l’entretien,
Composer le
(800) 468-7867 /
(800) 546-7867
Français ................ Pages 8-12
Instalación/Operación/Piezas
Para mayor información sobre
el funcionamiento, instalación o
mantenimiento de la bomba:
Llame al 800-468-7867 /
800-546-7867
Español ............... Paginas 13-19
©2012 SIM846 (07/16/12)
1569 0195
1572 0195 Vert GEN
2943, 2945 2956, 2958
293 Wright Street, Delavan, WI 53115
Phone: 800-468-7867
Fax: 800-390-5351
www.simerpump.com

Table of Contents

Questions and Answers

  • T
    therreraAug 28, 2025
    What to do if Simer 2945 has low water level?
    • D
      danielcolonAug 28, 2025
      If your Simer Water Pump has a low water level: * Lower the pump further into the well, ensuring it's at least 5’ (1.6M) above the bottom. * Throttle the pump discharge until it equals the recovery rate of the well. Running the pump while airlocked can cause loss of prime and seriously damage the pump.
  • R
    Rachel PerkinsAug 27, 2025
    What to do if Simer 2945 starting capacitor is defective?
    • D
      David CookAug 27, 2025
      If the starting capacitor in your Simer Water Pump is defective or blown, replace it.
  • N
    Natalie MurrayAug 27, 2025
    What to do if Simer 2945 has wrong size fuse?
    • J
      James HesterAug 27, 2025
      If your Simer Water Pump has the wrong size fuse or wrong size time delay fuse, install the correct fuse or time delay fuse.
  • J
    Jeff DavisAug 25, 2025
    What to do if Simer 2945 Water Pump is stuck or binding?
    • B
      Bryan StewartAug 26, 2025
      If your Simer Water Pump is stuck or binding: * First, perform all possible above-ground checks. * If necessary, pull the pump. * If the pump is locked, replace it. * Clean the well of all sand or lime before reinstalling the pump.
  • W
    Wendy WilkersonAug 25, 2025
    What to do if Simer 2945 Water Pump has no voltage at fuse box?
    • H
      hthompsonAug 25, 2025
      If there's no voltage at the fuse box for your Simer Water Pump, the suggested solution is to replace any blown fuses.

Simer 2945 Specifications

General IconGeneral
Cable length10 m
Voltage230 V
Maximum delivery height6 m
Maximum particle size3 mm
Maximum delivery rate300 l/min
Motor power290 W
Max Flow Rate300 l/min
Max Head6 m

Related product manuals