3. Place the back plate on the mounting surface and mark the location of the four screw holes.
Figure 6: Marking the location of the screw holes
Callouts Description
A Press here
B Back plate
C Screw locations
4. Using the four provided screws, mount the Annunciator back plate on the wall or mounting surface.
5. To attach the back plate to the housing, follow step 2 in reverse, see Figure 7.
Figure 7: Mounting the Annunciator back plate
page 9 579-1434 Rev B
Foundation Series 2606-9101 LCD Annunciator Installation Guide
To Next Page
Loading...
