Simplex 4007ES Hybrid - Selecting User Program

9-6
4007ES Panel Programmer Manual (579-1167)
Custom Control, Continued
Selecting User
Program
Note: You cannot write custom control on InfoAlarm switches and LEDs.
The first step in defining a new custom control equation is to add the equation to a User
Programs.
To add a new custom control equation:
1. Right click on one of the user programs, located at the bottom of the program list, and select
Add Equation from the list of options.
Figure 9-8. Add Equation
2. The Custom Control Program Properties dialog (Figure 9-9) appears. Enter a name for the
equation in the Label field and click on OK.
Figure 9-9. Equation Properties
The Equations section of the Custom Control window updates to include the [INPUTS],
[END INPUTS] etc, entries.