Simplex EP40 - How to Change Settings When the Password Is Set

48
42
41
1
Press the [SELECT] button, at that
moment "9999" is displayed and the
first two digits flash.
(The flashing means it can be changed.)
Set the first tow digits.
In the example, press the [CHANGE]
button to set at "12". And then press
the [SET] button.
At that moment, the flashing changes
to the last two digits.
2
Set the last two digits.
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
At that moment, the " " mark indicates
the "TIME".
3
Select desired setting mode by
pressing the [SELECT] button.
Once the password is set, you have to enter the password for changing any setting.
"9999" will be displayed when you press the [SELECT] button.
Example: Password "1234"
How to change settings when the Password is set
SELECT CHANGE SET
SELECT CHANGE SET
SELECT CHANGE SET
SELECT CHANGE SET
TIME
49
42
43
1
Press the [SELECT] button, at that
moment "9999" is displayed and the
first two digits flash.
(The flashing means it can be changed.)
In the example, press the [CHANGE]
button to set at "12". And then press
the [SET] button.
At that moment, the flashing changes
to the last two digits.
3
Press the [SELECT] button and position the
" " over the "PASSWORD" mark. At that
moment, the first two digits "12" flash.
(The flashing means it can be changed.)
Press the [CHANGE] button to set at
"00". And then press the [SET] button.
4
Press the [CHANGE] button to at set "00".
And then press the [SET] button.
5
After you finish canceling the password,
press the [SET] button once again.
Now the password canceling has been
completed. Replace the cover and lock.
Important: If you do not complete Step
5, the Time Recorder will not print.
The code "0000" must be entered to cancel the password.
Example: Cancel the password "1234".
Canceling the Password
SELECT CHA NGE SET
2
In case of the example, press the
[CHANGE] button to set at "34". And
then press the [SET] button.
SELECT CHA NGE SET
SELECT CHANGE SET
PASSWORD
At that moment, the flashing changes
to the last two digits "34".
SELECT CHANGE SET
PASSWORD
SELECT CHANGE SET
PASSWORD
At that moment, the " " mark indicates
the "TIME".
SELECT CHANGE SET
SELECT CHANGE SET
TIME
MO TU WE TH FR SASU
ENGLISH