Simplex EP40 User Manual

22. RESETTING
50
44
43
To return all setting to the factory defaults, push the reset switch with a pointed implement.
NOTICE: All your custom settings will be deleted and will revert to the factory defaults
when the reset switch is pushed. To make new settings, please refer to "Setting ···".
Reset Switch
WALL
23. WALL MOUNTING
51
44
45
Caution: The supplied screws are intended for use on a thick wooden wall or wooden
column. Do not use any other materials. The Time Recorder may come off if used on
other materials.
1
Install the supplied wall-mount screws
into a wall by using the template.
Be sure to keep about (1/4") 6mm of
the screw head away from the wall.
2
Unlock the key and remove the cover.
And then hang it on the wall.
3
Replace cover and lock.
WALL
WALL
ENGLISH

Simplex EP40 Specifications

General

Brand	Simplex
Model	EP40
Category	Clock
Language	English