Warnings and Cauons — 1
1 WARNINGS AND CAUTIONS
e following images indicate important safety information:
is General warning symbol points out important
information that, if not followed, could endanger
personal safety and/or property.
is Explosion warning symbol points out
potential explosion hazards.
is Fire warning symbol points out potential re
hazards.
is Electrical warning symbol points out potential
electrical shock hazards.
is load bank is high-powered, technical, industrial
equipment operating at dangerous voltages and temperatures. It
is capable of damaging itself, property or personnel if improperly
used. It is not a consumer product.
It must be installed, connected and operated by personnel
properly trained and experienced in its use. An operator’s
manual is supplied with each load bank and available online at
www.simplexdirect.com. e operator must be familiar with its
contents and have access to it during operation.
• High Voltage: Turn o and disconnect power source before
opening this equipment
• High Temperature: Allow hardware to cool before servicing
or opening this equipment.
• Rotating Equipment: Ensure that the fans have stopped
before opening this unit.
• For Operator Safety: Make sure this equipment is properly
grounded when in use.
All compression-type connections on fuse blocks, load blocks,
and contactors should be checked for tightness frequently. is
check should be established as part of routine maintenance.
e following cautions should be observed before and during
operation:
• Check intake and exhaust screens as well as fan and load
elements for foreign objects.
• Position and install the load bank with consideration given
Safety
information
SymbolS
CautionS