2-11
IMPORTANT: Notify the appropriate personnel (building occupants, fire
department, monitoring facility, etc.) of the installation.
The following sections contain installation information which is applicable to the 4009 TrueAlert
Addressable Controller. Be sure that you are thoroughly familiar with this information before
installing the 4009 TrueAlert Addressable Controller.
To help you with installation of this and other Simplex Fire Alarm equipment, use How to Wire a
Building for a Fire Alarm System (FA2-91-001 or 575-892) for general reference.
The following tools and equipment are required to install the 4009 TrueAlert Addressable
Controller:
• 1/4-inch flat-tip screwdriver (Phillips screwdriver optional)
• 1/8-inch flat-tip screwdriver
• Volt-Ohmmeter
• Diagonal cutting pliers
• Wire strippers
Continued on next page
System Installation
General Information
Tools and
Equipment Required
To Next Page
Loading...
