3-1
The 4009 TrueAlert Addressable Controller can be configured to work with the 4010 via
programming at the 4010 panel.
The panel programmer has the capability of auto-detecting new hardware, so that a 4009
TrueAlert Addressable Controller can be added to an existing configuration. Alternatively, the
panel programmer can be used to manually add the 4009 TrueAlert Addressable Controller to the
system setup. This chapter describes both methods.
The table below lists the topics in this chapter.
Topic See Page
4010 Programming Steps 3-2
Deleting the 4009 TrueAlert Addressable Controller 3-6
4010 Quick CFIG 3-7
Chapter 3
4010 Panel Programming
Overview
In this Chapter
To Next Page
Loading...
