Chapter 8-12 CP44/54 Setup menu
A-Z
Key in a name for the new palette setup - max. 29 characters,
-refer to “Naming of routes, points, etc.” in section 2.6.
+/-
Toggle between available color settings
ENT
Confirm new setup
8.7 Factory settings
DELETE MEMORY:
It will be possible to erase a single category of objects entered into
the unit by the user - for example, if moving to a different place in
the world you may no longer need the routes etc. you have in the
memory. However, an alternative is to store the data on a DataCard
or disc - refer to section 7.9.
FACTORY PRESETS:
If the unit is still ‘alive’ but has ceased to respond to normal opera-
tion, it could become necessary to return to the factory presets - but
first check ‘Troubleshooting’ in section 9.1.
Activating ‘Return to all factory presets’ will erase all user-made
settings including waypoints, routes, tracks etc. and restore the basic
settings from the factory.
Show test display
Information in this display is for technicians only.
MENU
Call up the menu bar, and...
6,5
activate the display for Factory settings
To activate any of the functions, please follow the instructions in
the display. However, any attempt to make any type of change, will
first of all generate a WARNING display to inform you that you are
about to erase some or all data/settings.
To Next Page
Loading...
Need help?
General
